REFILL INK CARTRIDGES CANON BCI-60, BCI-61, BCI-62

Refill Ink Cartridge Canon BCI-60, BCI-61, BCI-62

Refill Ink

1. The filling holes are located under the label as shown. Just peel back the label leaving it still connected to the cartridge, do not remove completely.
2. Use the provided eyelet screw to widen the filling hole(s) in the top of the cartridge(s).
3. Connect the needle to the syringe and fill with ink.
4. Insert the needle into the widen filling hole. Note: This cartridge has a sponge so you may feel a slight pressure. Inject about 10 ml. of ink, per color until the ink bubbles up.
5. Pull the label back into place and use a piece of tape to hold it in place.
6. Rinse the syringe with water and dry between each color refill or store for future use.
7. Reinsert cartridge back into the printer and run 1 - 3 cleaning cycles as per printer instructions

Tweet