SAMSUNG SCX-4100 SERVICE MANUAL

Samsung SCX-4100 Service Manual is the main document used to repair, maintain and troubleshoot the Samsung SCX-4100 printer. Precautions to avoid accidents and prevent damage to the computer, read the precautions outlined below before servicing the printer and follow them closely. Safety Warning; They must only be serviced by qualified service engineers. The high voltages and lasers within this product are dangerous. This printer must only be serviced by properly trained and qualified service engineer. Only use spare parts for Samsung, not any parts serviceable by the user inside the printer. Do not perform changes or additions unauthorized to the printer, they may cause a malfunction of the printer and create an electric shock or fire.

Handling Precautions; The following instructions are for your own personal safety, to avoid injury and to prevent damage to the printer. Make sure that the printer is installed on a surface level, able to bear its weight. If it does not, the printer may fall or fall out. The printer contains many rollers, gears, and fans. Be very careful to make sure that it does not catch fingers, hair or clothes in any of these spinners. Do not place small metal objects, containers of water, chemicals or other liquids close to the printer who, if they leak, may enter into the machine and cause damage or a danger of fire or shock. Do not install the machine in areas with high levels of dust or moisture, in addition to an open window or near a humidifier or heater. Damage to the printer in such areas. Do not place candles, lit cigarettes, etc in the printer, this could cause a fire hazard.

 Assembly / Disassembly Precautions; Replace parts with care, always use Samsung parts. Be careful to note the exact location of parts and also the routing of wires before dismantling any part of the machine. Make sure that all parts and cables are correctly positioned. Perform the following procedures before removing the printer and replace any parts. Check the contents of the memory of the machine and take note of any user configuration. These will be erased if replaced plate base or network card. Make sure that the power supply is disconnected before repairing or replacing any electrical part. Disconnect the printer interfaces cables and power cables. Use only spare parts approved. Make sure that the part number, the product name, the voltage, current or temperature are correct. To remove or reset any part, do not use excessive force, especially to tighten the screws on the plastic. Be careful not to drop any small parts on the machine. Management of toner cartridge

Table of contents Samsung SCX-4100 Service Manual Precautions, Reference Information, Specifications, Summary of the product, Disassembly and Reassembly, Alignment and Adjustments, Troubleshooting, Exploded Views and Parts List, Block Diagram, Connection Diagram.

Download Samsung SCX-4100 Service Manual

Tweet