Download Free Apple iPod Mini Take Apart Repair Manual.pdf This manual is presented as a guide in order to help you repair problems on your iPod Working on an iPod can be dangerous if not done properly. Begin by removing any cable that may be attatched to the iPod mini including headphones or docking cables. At the top and bottom of the iPod Mini are white oval plastic inserts. Using a flat head tool gently pry the insert out. It is held on by a very light adhesive and 3 clips. It should come off easily. Do not use too much force in prying or you may damage your casing. It is also recommended to use a plastic or nylon tool (available from our store) so you do not scratch the casing.
Before proceeding, you must follow the previous instructions to remove the iPod Mini from the shell. The battery is connected to the logic board by two cables that lead into a connector. This connector plugs into another connector on the logic board. (Think of it as an electrical plug) If you grasp the cable and gently pull up, the two connectors will separate and the battery will come free. To install a new battery, simply attach the two connectors and reassemble the iPod.
Table content of Apple iPod Mini Take Apart Repair Manual
Before proceeding, you must follow the previous instructions to remove the iPod Mini from the shell. The battery is connected to the logic board by two cables that lead into a connector. This connector plugs into another connector on the logic board. (Think of it as an electrical plug) If you grasp the cable and gently pull up, the two connectors will separate and the battery will come free. To install a new battery, simply attach the two connectors and reassemble the iPod.
Table content of Apple iPod Mini Take Apart Repair Manual
- Removing the Shell / Plastic Covers
- Battery Removal
- Hard Drive Removal
- Headphone Jack Board Removal
- LCD Screen Removal
- ClickWheel Removal
0 Response to "APPLE IPOD MINI TAKE APART REPAIR MANUAL"
Post a Comment