Download Free Peugeot Speedfight Chipkey 1 CDI-unit Installation Manual.pdf these CDIs bypass the original immobiliser system (Chipkey system), so no new key is needed 3 they are direct replacements for the OEM CDIs. 3 a very cheap and reliable solution 3 easy to install.
Installation Peugeot Speedfight Chipkey 1 CDI-unit Installation Manual
Installation Peugeot Speedfight Chipkey 1 CDI-unit Installation Manual
- Place the by-pass between the 3 pole connectors. Simply replace the OEM CDI with our CDI, that’s it! (see image 3)
- Seperate the two black/red cables from the scooter, and connect these like a by-pass to the two black/red cables from the HPI CDI-unit. (see image 3)
- Connect the black cable (with ring) to the –pole of the battery (mass).
- Pull the 2 connectors out of the CDI-unit of the scooter.
- The orange cable has to be connected to the HT-coil. This connection can be found on one of these two connectors. Look at image 1 to pinpoint the correct position.
- Simply replace the OEM CDI with our CDI, that’s it!
0 Response to "PEUGEOT SPEEDFIGHT CHIPKEY INSTALLATION MANUAL"
Post a Comment