Download Free PhatBox Digital Media Player - BMW Quick-Start Guide.pdf Installing the PhatBox Mounting the PhatBox When choosing a mounting location remember: Leave at least 3 inches of clearance for the cable. The PhatBox should be mounted parallel or perpendicular to the floor of the car. Don't mount near wiring or fuel lines. Leave the front of the PhatBox unobstructed for easy insertion of and removal of the cartridge. The unit should be mounted to a hard stable surface, such as particle board or sheet metal.
Connecting the PhatBox to a Car Stereo Head Unit
Connecting the PhatBox to a Car Stereo Head Unit
- Turn off the car and the radio
- Gain access to the CD changer cables located in your trunk. They are usually located near the navigation system or attached to the CD changer.
- Connect the short PhatNoise cable to the adapter box, then plug your BMW CD changer cable into the other side of the adapter box. Do not attach the PhatNoise cable to the PhatBox yet.
- Secure the PhatBox to a flat mounting location with the four included self-tapping screws.
- Fully insert the cartridge into the front and then plug the PhatNoise cable into the back of the PhatBox
- The red and green lights should turn on.
- 5 seconds later, both lights should be off and stay off.
- Turn on your stereo (usually by turning the key to ACC).
- Switch to CD changer mode on your stereo by pressing the SRC button until DISC or MODE appears on the display. If there is no CD changer option, then press the RESET button on the radio (consult your radio owner's manual for assistance).
- Wait up to 15 seconds for a welcome message to play.
- Congratulations! The PhatNoise PhatBox is installed and ready to be used. Turn off the stereo and remove the cartridge.
0 Response to "PHATBOX DIGITAL MEDIA PLAYER BMW QUICK START GUIDE"
Post a Comment